100% Origion T-1000S SD Card LED Pixel Controller,DC5~24V,Max 2048Pixels,Support WS2801,LPD6803,WS2811,TM1804,TM1809,LPD8806 Etc

100% Original, not copy version! 100% Good quality!

We only sale good original products! Refuse Copy!

I. T-1000S System features

1. 32—256 grade Gray level,Support software Gamma correction.

2. Support the rules and special-shaped handle.

3. 1 port output,can support 2048 lamp pixels.

4. SD Card control,offline control, the contents of the line control program stored in the SD card..

5. T-1000S store 16 files max, copy the files into SD card in turns.

6. Files be stored in the SD named as:00_1.led, 01_1.led, 02_1.led.

7. Compatible with single line or double line chips. Do not need to connect CLK line when use single line led fixture.

NOTE:

1. The model T-1000S with one port output, When it control 512  pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically
2. T-1000S must use the new software LedEdit 2013.

3. After you put the order, if you need the LedEdit2013 software, please contact to us, then we will send it to you free. And also we can teach you how to use the software if you don't know how to use it.

II. Support chips:

3. Connection diagram:

Regulatory function button:

4. System architecture diagram:

Specific parameters:
Memory Card:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: .led
Physical parameters:
. Weight:0.3kg
. Size:122mm67mm25mm
. Temperature :-40-85 Degree
. Volgate: DC5V / DC7.5-24V
. Power:3W

1. Multiple T-1000S controllers can be cascaded together and work synchronously.

2. T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps;

3. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.

4. If you need to use RS485 signal you need to connect controllerAinterfacewith LED lamps A (DMX+), controllerBinterfacewith LED lamps B(DMX-),

5. If you need to control a new IC type by the controller, software code mode is:T-1000-IC model.

Note:
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.

The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply

VIII.Trouble shooting

Question 1:After power, the T-1000S ERROR indicator has been flashing without display output

answer:The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:

(1)SD card is empty, with no effect file.

(2)The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led.

(3)SD card did not format to FAT before copy effect files.

(4)Please check the supply power voltage, the controller can be individually powered to exclude power reasons

(5)Changing the SD card and then test to exclude the possibility of a bad SD card

Question 2: The controller is powered on, the indicator is normal, but the lamps have no effect change

Answer:The reasons for this are as follows:

(1)Check if the lighting′s signal line and the controller connected correctly

(2) If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together

(3)Check if the model chose during making display files on the SD card match the chips used in the lighting

1. DHL, FedEx, TNT, UPS, EMS, AliExpress Standard Shipping or AliExpress Premium Shipping can be chosen. DHL, FedEx, TNT, UPS is fast,yYou can get the packages in 5~7 working days after the goods are sent out.

2. If you are hurry about your goods, please choose DHL. DHL is the faster way.

3. If your country is difficult to deal with customs clearance, please you choice EMS. EMS is most slowly but very good for customs clearance. Brazil, Russian Federation, Belarus customers please choose EMS.

4. The order address you offered on the order should be correct. We will default send the order to the order address. If the address that you offered is wrong, please cancel the order and place a new order again.

5. It is the buyer's duty to deal with customs clearance and pay customs clearance fee, please pay attention to the tracking information closely and clear customs as soon as possible.

6. AliExpress Standard Shipping is small package like China Post Air Mail or Hong Kong Post Air parcel, delivery time is longer, maybe around 30~60days. please make sure you have enough time to wait if you choose this way.

7. AliExpress Premium Shipping is faster than AliExpress Standard Shipping, slowly than DHL, FedEx, TNT, UPS.

What's AliExpress Shipping? http://activities.aliexpress.com/aliexpress_shipping.php

It is easy to send the payment if you put the order on aliexpress. Payment method on Aliexpress pls click herehttp://help.aliexpress.com/payment_method.html

Except aliexpress. PayPal, T/T (Bank transfer), Western Union etc.

Warmming tip: PayPal & Aliexpress support credit card.

Dear customers, if you are satisfied with our products and service, please kindly give us 5stars and good praise! We will be very appreciate if you give us 5stars and good comment. It will be helpful for another customers! Hope we can do more business together! We will try our best give you the best service! Thank you very much!